How the tractor truck works

There are two ways to connect the tractor truck and the caravan the first one is that the frontal half of the caravan is placed on the traction defile above the hinder section of the tractor truck, and the ground behind the tractor truck bears part of the weight of the caravan, which is a semi-trailer. The alternate is that the frontal end of the caravan is connected to the hinder end of the tractor-truck. The 6x4 tractor truck only provides forward-pulling force to drag the caravan but doesn't bear the downcast weight of the caravan. This is the full caravan. So, do you know how the tractor truck works? Then are some answers.

Here is the content list:

• A brief description of the principle of the tractor truck.

• The control system of the tractor truck.

A brief description of the principle of the tractor truck.

The working principle of the tractor truck is: there is a traction seat support on each of the two sides under the seat cover plate pressed by a steel plate, which is connected with the seat cover plate by a pin shaft. The base of the traction seat can rotate back and forth with the pin as the center relative to the seat cover. The bottom surface of the traction seat base is connected with the pulled trailer with bolts, and a locking mechanism consisting of a horseshoe, inclined iron, knuckle, adjusting disc, crossbar, pull rod, and spring is arranged under the seat cover. The horseshoe is fixed on the seat cover, and the knuckle, pull bar, and cross bar are connected with pin shafts. The inclined iron is also connected with a pin shaft, and the pull rod is connected to the rib plate under the seat cover by a spring. It's characterized in that the two tails behind the defile-shaped seat cover are large bends, and there's a butterfly-shaped hollow face in the middle, which divides the entire airplane into five corridors of analogous size.

The control system of the tractor truck.

Traction Control System appertained to as TCS, also known as ASR or TRC. Its function is to enable the tractor truck to gain stylish traction in colorful driving conditions. The control device of the traction control system is a computer that uses the computer to descry the speed of the four buses and the steering angle of the steering wheel. When the CNG tractor truck accelerates, if it detects that the speed difference between the driving wheel and the non-driving wheel is too large, the computer immediately judges that the driving force is too large, and sends a command signal to reduce the fuel supply of the engine, reducing the driving force, thereby reducing the slippage of the driving wheel Rate. The computer grasps the driver's steering intention through the steering wheel angle sensor, and then uses the left and right wheel speed sensors to detect the speed difference between the left and right wheels. To judge whether the steering degree of the car is the same as the driver's steering intention. If the understeer or oversteer of the tractor truck is detected, the computer immediately judges that the driving force of the driving wheels is too large, and issues a command to reduce the driving force to realize the driver's steering intention.

The traction control system can prevent the driving wheels from idling when the tractor truck is driving on slippery roads such as snow so that the 4x2 tractor truck can start and accelerate smoothly. Especially on snowy or muddy roads, the traction control system can ensure smooth acceleration and prevent the tractor truck from traversing or drifting due to slipping of the driving wheels.

If you are engaged in work related to tractor trucks or want to know more about our company, you can communicate with us on the website, our official website is https://www.camcexport.com/. Adhering to the corporate culture of "quality first, customer first", our company has always made unremitting efforts to become a professional supplier of tractor trucks in the industry.